Grand Rental Station of Winchester

• 15 Amps, 4,300 RPM
• Natural debris removal — Wheel rotation carries sparks, dust and debris away from the operator
• AC/DC capability — Extends the versatility of the tool by working from DC outlets such as welders and generators
• Reinforced armature windings — Protects motor against abrasive dust and metal debris
• Service Minder™ brushes — Eliminate guesswork, stops the tool when preventative maintenance is required
• Reversible handle — Wrap around side handle mounts left or right for added convenience and versatility
• Large footplate — Improves stability and allows greater depth of cut, smooth on both sides for guiding
• Double insulated, UL listed, com

These Shark models are tough gasoline-powered direct-drive cold water machines that deliver cleaning power of up to 3500 PSI. Built on compact sturdy steel frames, each unit features a dependable industrial-grade Honda engine, Kärcher crankcase pump, hose/gun rack, detergent injection, and tubed pneumatic tires

 Our floor machines are field tested for heavy duty stripping, scrubbing and polishing hard surface flooring. The simple and rugged design makes them easily accessible with low cost and maintenance requirements. They are built for large areas, yet ideal for use in small and confined areas.

• Extra-long reach — 2" longer with no added weight
• Jam-Free design — staples clear without jamming
• Integral pusher spring — no loose parts
• Broad contact area protects against damage to stapled material
• Offset handle for knuckle clearance with comfort grip
• Increased staple capacity — holds two full sticks of staples (168)
• Steel cap for extra durability

Fastener Range 1/2 - 1 1/2

Fastener Guage 18 GA

Fastener Type sx5035 Series Staples

With a 25 hp Kubota diesel for power and featuring an 8.5 ft ALLMAND ESL backhoe, the TLB 425 has the power and flexibility to handle those "big" jobs.

The industries best solution to blind nailing close to the wall.   Save both, time and money!"

Pressure activated...simply press down, and let the tool do the work.

The Power Palm will allow blind nailing closer to the wall and reduce the amount of face nailing.

"Using the Power Palm with Powernail 16 or 18 gage L Cleats you will maintain the integrity of your installation, by using the same fastener from start to finish"

"Blind nail, top nail...tight spots and corners, the Power palm gets them all!"

Featuring 360 degree swivel tip

Magnet

 is a pneumatic Powernailer® designed for 18 gage cleats.

The 50P is recommended for use on 3/8", 1/2", 5/8" and 3/4" Tongue and Groove flooring. The Model 50P with 18 gage Powercleats is your best choice for installing some of the harder, 3/4" exotics such as bamboo and other solid or engineered wood flooring.

The model 50P uses a thinner 18 gage cleat that is less likely to split the tongue on thinner woods.  It is also recommended for flooring that is a very hard species like hickory. Many of the hard exotics available today require a thinner cleat to penetrate without splitting the tongue.

The standard configuration is (L/S), Long Handle with Short Channel, which holds 100 Powercleats®.  Long handle configuration provides 18" height from floor to handle grip.

<span style="

Surface Nailer is recommended for use on 1/2", 5/8",3/4" and 33/32" Tongue and Groove flooring.

The pneumatic 445SN allows the user to nail flooring up to 1" from the wall.

Nailer package includes a choice of Black or White 3mi Mallet, Lube oil, 2 box wrenches, 2 Allen wrenches and an extra driving blade.

Requires a 70 to 110 psi air compressor.

The TS 420 is so popular, it could possibly be called “the standard” to which other cut-off machines are compared. Users like it because it is compact, lightweight, reliable and proves itself day in and day out, all day long. The TS 420 features all the high-performance features of the TS 410 – including an X2 air filtration system for a clean and smooth-running engine and virtually maintenance-free filters. With the added benefit of a 14” cutting wheel, it will handle cuts up to 4.9 inches in depth. This cut-off machine backs up its larger cutting capacity with a ton of usability features.

The Model 45 is a manual, single-blow nailer which use 16 gage cleats to install Tongue & Groove flooring.

The Model 45 is recommended for use on board sizes of 5/8", 3/4" and 33/32" Tongue and Groove flooring.

Nailer package includes a choice of a Black or White 5mi Mallet, an extra driving blade, plunger spring, feeder spring, blade retainer and 8/25 adapter plate for installing 3/4" & 22mm Tongue and Groove Flooring.

Options: Adapter plate 826-12 for 1/2" Tongue and Groove flooring, or adapter plate 826-58 for 5/8" Tongue and Groove flooring.

The Model 445is a pneumatic Powernailer® which uses 16 gage cleats for the installation of Tongue & Groove hardwood flooring.

The Model 445 is recommended for use on 5/8", 3/4" and 33/32" flooring.

Towable Diesel 185CUFT Compressor

CF364 36" Power Trowel offers precision handling for the professional concrete finisher and include patented features not available on any other brand.

655PM Mortar Mixer has a 6 cu.ft. batch capacity, 1 1/2 - 2 bag capacity. Use this tow-behind mixer to mix mortar, plaster, stucco, color blending and fireproofing - every mixing
need.

25CMP Concrete Mixer is a small wheelbarrow style mixer. The Little Champ™ with a one-two punch provides convenient portability and compact storage. Ideal for the small rental fleet, small construction jobs, and homeowner projects.

Subaru 3" Trash Pump, 314 gallons/minute

The Kushlan Products 350 Mixer Fully Assembled is filled with features that makes this rugged mixer affordable yet ideal for the do-it-yourselfer or professional. Electric-driven, 21 RPM mixers can swivel 360° and can be discharged in any direction. Supported by a durable steel frame, the drums are adjustable to the correct angle for a variety of mixes. The 5/16" thick polyethylene drums are resistant to dents, cracks, and rust yet easy to clean. Easy breakdown for transport or storage, the 3.5 cu. ft. drum holds 2 bags of premix concrete

Dry areas quickly with this compact, three-speed blower.
Quickly dry carpet, hard floors, fresh paint, concrete sealer and much more.
Ensure durability and many years of use with this blower's rotationally-molded body

Using four-pad, random orbit technology, the U-Sand Pro sander makes floor sanding easy and worry-free

2" electric dewatering pump with auto float. Automatic version of our model LB-480. Relay sensor activates pump when water comes in contact with the electrodes. When water falls below the sensor's electrodes the pump runs for one minute then shuts off automatically

The Stump Grinder cuts up to 36" above, and 16.5" below grade, and with a 12 carbide-tipped blades on a 17" wheel it will make short work of most stumps

The Soil Cultivator is a one-pass lawn rennovation/bed prep tool with tremendous labor savings. The Soil Cultivator buries rocks up to 4" in diameter and brings loose, pulversized soil to the surface, leaving only the planting to be finished in its wake

The Tiller makes short work of traditional tilling, employing a heavy-duty, high torque design with hardened steel tines for any soil conditions, with no labor intensive man-handling of the machine. Till 6" deep and 40" wide in one pass

The Leveler is an excellent choice for light grading, backfilling, leveling of terrain, and as a platform for carrying materials to and from the jobsite